Pipe Flow Expert is designed to help today’s engineers analyze and solve a wide range of hydraulic problems where the flow rates, pressure losses and pumping requirements throughout a pipe network must be determined.


The Pipe Flow Expert software will allow you to easily draw out a pipeline system and analyze the performance of the system when flow is occurring. Pipe Flow Expert calculates the balanced steady flow and pressure conditions of the system. 


The software will allow you to perform analysis of alternate systems under various operating conditions.


The reported results include:


  • flow rates for each pipe
  • fluid velocities for each pipe
  • Reynolds numbers
  • friction factors
  • friction pressure losses
  • fitting pressures losses
  • component pressure losses
  • pressures at each node 
  • pump head
  • pump operating point
  • NPSHa at pump inlet


The input and display of system information on the Pipe Flow Expert drawing and in the results tables can be shown in metric or imperial units to suit your preference and specific units for each item (such as flow rate) can also be configured and set on an individual basis as required.


The Pipe Flow Expert software has been designed for the professional engineer who needs a powerful tool that has a class leading, easy to use and robust interface that makes it simple to design and analyze pipe networks.